Required parts
  M2.6 NUT
  M2.6x8 

  M4 NUT
  M4 screw (for FAN)

  Compression spring, 3 mm OD ~ 9 mm free length (2pcs)

STEP0
Remove all supports

STEP1
Place the spring between the parts and hold it in place.

STEP2 
Press-fit the M2.6 nut into the hole.
Note: It is better to pull the nut in from the opposite side with a screw.

STEP3
Attach the cover.
Make sure there is no gap.


STEP4
Fasten the cover from the opposite side with an M2.6 screw.

STEP5
Attach the fan.
Note: The fan should blow air toward the IC-705.

Kvȕi

- M2.6ibg
- M2.6~8 mm˂
- M4ibg
- M4˂it@Œpj
- k΂ˁFOa3 mm ~ R9 mmi2j

STEP 0  
T|[gނׂĎ菜܂B

STEP 1  
i̊Ԃɂ΂˂AȂ悤ɉ܂B

STEP 2  
M2.6ibgɈ܂B  
Α˂ʂAߍŃibgނƎt₷Ȃ܂B

STEP 3  
Jo[t܂B  
ԂȂƂmFĂB

STEP 4  
ΑM2.6˂ŃJo[Œ肵܂B

STEP 5  
t@t܂B  
IC-705ɌĐɎtĂB

